The holiday season has arrived. I can't believe thanksgiving is over now begins work on the interior. I am removing the old interior plywood which is a bit weathered. I have carefully removed the aft starboard quarter berth. Each screw is buried under epoxy or a wood plug so I'm using the Dremel tool to expose each screw head. The process is a bit tedious but is necessary to preserve the integrity of using them as templates. I've removed the aft quarter piece and I've exposed some mold so this process is definitely important. A slow steady progress will get the interior stripped out. Then a bit of glass work is the plan followed by a marine polyurethane. I can tell the interior work ahead will take a couple of weeks. Here are some pictures of the beginning of the project.
No comments:
Post a Comment